Lira 40 RGB Directional

Designer : D. Bartolini

Details

ac

Indoor and outdoor light fitting
Drive/walk-over recessed uplight with directional ring, for wall/pavement mounting with recessed box

Colour
Stainless steel

Suitable for
Pedestrian areas, gardens, sheltered inside and outside of buildings, especially suitable for accent lighting

Special features
Suitable for open air use due to high protection rating (IP67)
Energy saving
Extremely compact
Adjustable beam direction
Recessed box closed above and below to facilitate concreting

Technical details-fitting
• Thermoplastic recessed box
• AISI 316L stainless steel body
• Tempered glass diffuser
• 1/2/4 directional ring in AISI 316L stainless steel
• Drive-over 500Kg at max. 20Km/h
• Stainless steel screws

Technical details RGB
• 1 Led RGB full color 3W CREE with beam optics 60° supplied in 350mA
• Cable 6x0.25mmq in crystalline PVC (0,4mt)

Compulsory accessories RGB
• DMX generator (Cod. CS180001)
• DMX controller with splitter (Cod. CS180006)
• RGB connection kit 6 pole (Cod. CS180007)

 Compulsory accessories
for ground mounting
• Recessed box ø100x80mm (Cod. 7000.0003)
• Recessed tube ø35x70mm (Cod. 7000.0007)

For false ceiling installation
• False ceiling locking mechanism kit (Cod. 4000.001W)

DimensionsLamp typePowerColour*Code
Ø40x66mmLED RGB3W Stainless steel4044183W1
Ø40x66mmLED RGB3W Stainless steel4044283W1
Ø40x66mmLED RGB3W Stainless steel4044483W1

*To download specifications click on the PDF icon

For proper viewing of documents download Acrobat Reader® click here

image image image image image image image image image image IP67
image
image

Compositions and poles

Accessories

Maintenance

Download

ASSEMBLY INSTRUCTIONS (554 Kb) ISTRUZIONI DI MONTAGGIO (554 Kb) WIRING DIAGRAM (2283 Kb) 2D (313 Kb)

For proper viewing of documents download Acrobat Reader® click here

Similar

Combinations

Features

ac


Installation with recessed box or tube

Recess the recessed box wall/floor/ceiling level, and

then connect the wires (+ brown wire, - blue wire)

 

Insert the fitting into the recessed box, making sure to

position it correctly according to the beam direction (for

asymmetric and directional optics versions)

 

 

Installation with locking mechanism (for false ceiling)

Make a hole Ø32mm in the wall or ceiling

 

WARNING: the thickness of the mounting surface must be

from min.10 to max. 20mm

 

Connect the wires (+ brown wire, - blue wire) and insert the

fitting into the hole, making sure to position it correctly

according to the beam direction (for asymmetric and

directional optics versions)

 

 

 

Photos