Mareco Luce

Led power & output - Tc 25°C

23.2W - 4000K - 4465 lm - 220-240V 50/60Hz

23.2W - 3000K - 4229 lm - 220-240V 50/60Hz

Luminaire power & output - Ta 25°C

26.2W - 4000K - 3694 lm - 220-240V 50/60Hz

26.2W - 3000K - 3500 lm - 220-240V 50/60Hz

CUT-OFF

Step MacAdam 3

Lifetime: L80/B10>50Kh - Tc 65°C

Technical details

- Cut-off LED luminaire suitable for urban areas

- Silicone gaskets

- Polyester powder coating after a treatment specific for weathering resistance

- A2 stainless steel screws

- Conforms to regional laws against light pollution

- Only upon request version with power reduction with switching time selectable

- Anodized aluminum heat sink (ribbed shape)

Housing

- Hot-dip galvanized and painted steel housing

- Metric M20x1.5mm cable gland complete with vent valve

Wiring

- LED Circuit 26.2W powered at 700mA

- Reinforced thermoplastic wiring compartment and cover, black coated

- Fortimo Led circuit board by Philips

Optics

- Silicone Transparent LEDIL optics symmetrical

- Silicone Transparent LEDIL optics asymmetrical

- In case of specific project requirements it is possible to request the special Ledil ® lenses

Buried pole - System A

- Square pole 70x70x4500mm for ground fixing made of hot-dip galvanised steel 75μm UNI EN 1461

- Suggested plinth 1000x1000x1200mm

Flanged pole - System B

- Square pole 70x70x4000mm for plinth/floor fixing complete with flange made of hot-dip galvanised

steel 75μm UNI EN 1461

- 350x350mm flange, 12mm thick made of hot-dip galvanised steel 75μm UNI EN 1461

- Suggested plinth 1000x1000x1200mm

Compulsory accessory

(to be ordered separately)

- Counter flange 350x350x3mm and anchor bolts kit M18x500mm (only system B)

Optional accessory

(to be ordered separately)

- Surge protection kit:

- When purchased the protection kit will be installed inside the luminaire

- Max impulse voltage UOC 10KV

- Voltage protection level L-N <1500V